ACU-RITE 200S READOUTS Manuel d'utilisateur télécharger pdf (Page 60)

46 I

I - 4 Turning Specific Operations

This section discusses operations specific to turning applications only.

Tool Display Icon

The Ø icon is used to indicate that the displayed value is a diameter

value. No icon visible indicates that the display is a radius value.

Tool Table

The 200S can store the dimensional offsets for up to 16 tools (see

sample screen). When you change a workpiece and establish a new

datum, all tools are automatically referenced from the new datum.

Setting Tool Offsets Example 1: Using TOOL/SET

Before you can use a tool, you must enter its offset (the cutting edge

position). Tool offsets can be set using the TOOL/SET or LOCK

AXIS feature.

The TOOL/SET operation can be used to set a tool’s offset using a tool

when the diameter of the workpiece is known.

8 Touch the known diameter in the X axis (1).

8 Press the TOOL soft key.

8 Scroll to the desired tool.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 97 98

Pas de commentaire

ACU-RITE 200S READOUTS Manuel d'utilisateur Page 60