ACU-RITE 200S READOUTS Manuel d'utilisateur télécharger pdf (Page 45)

200S 31

I - 3 Milling Specific Operations

Example: Probe workpiece edge and set edge as datum

8 Preparation: Set the active tool to the tool that will be used to set

the datum. An end mill is shown in this example, along with the Set

Datum screen.

 Datum axis: X =0

 Tool diameter D = 0.25”

8 Press DATUM.

8 Press the Down arrow key until the X axis field is highlighted.

8 Press PROBE soft key.

8 Press EDGE soft key.

8 Touch workpiece edge.

8 Press the TEACH soft key to store the current absolute value while

the tool is in contact with the workpiece edge. The location for the

touched edge will take into account the diameter of the tool in use

(T:1, 2...), and the last direction the tool was moved prior to pressing

the TEACH soft key.

8 Retract the tool from the workpiece and enter 0” and then

press ENTER.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 97 98

Pas de commentaire

ACU-RITE 200S READOUTS Manuel d'utilisateur Page 45