Acu-rite Micro-Line T Manuel d'utilisateur télécharger pdf (Page 18)

15

MICRO-LINE Reference Manual

OPERATION

1. Place your workpiece into the

chuck.

2. Make a face cut and clear the work

piece by backing the tool off in the

X-axis only. Do not move the Z-

axis. (Fig. 2)

3. Zero the Z-axis by pressing the Z-

zero key twice. (Fig. 3)

4. Make a skim cut on the diameter of

the workpiece and clear the work-

piece by backing the tool away in

the Z-axis. Do not move the X-

axis. (Fig. 4)

5. Measure the diameter of the work-

piece. (Fig. 5)

6. Press the X-axis zero key once,

then using the keypad, press the

RAD/DIA key to select diameter

and enter the diameter of the

workpiece, then press

ENTER. (Fig. 6)

Example:

Setting Up Your Job

2

3

4

5

6

MLTmanual.QXD 2/12/02 4:10 PM Page 34

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Commentaires sur ces manuels

Pas de commentaire